Go!

2025 Honda CRF 250RX

Total Price:    $6,999.00

Highlights


66 Minard Run Rd
In Stock
Pre-Owned
2025
Honda
CRF 250RX
Red
Off-Road
Off-Road
249cc liquid-cooled single-cylinder four-stroke
Five-speed
JH2ME12C8SK600425
600425

RECENTLY VIEWED

info
2025 Honda CRF 250RX

Conquer every horizon



The CRF250RX merges motocross thrill with desert racing design, featuring customized gearbox ratios, an 18-inch rear wheel, unique engine settings, handguards, a sidestand, and a larger fuel tank. So, if you're looking for a powerful, precise, and nimble off-road ride with cutting-edge suspension, look no further.



Features:



Performance



Fuel injection system



Tilting the fuel injector at a 60-degree angle sprays fuel directly towards the throttle butterfly, providing the engine with a denser and cooler fuel charge and increasing torque and power.



DOHC engine



It features a unique finger-follower rocker design in a double-overhead-cam (DOHC) engine layout, providing more power and a higher redline.



Big bore/short stroke



The 79mm bore and short 50.9mm stroke let our engineers create a high-revving engine with plenty of room for large valves—the two keys to making power in the enduro world.



Downdraft intake and exhaust



The DOHC cylinder-head design straightens the intake and exhaust tracts for improved efficiency. Straighter ports boost low-speed and midrange torque and throttle response.



Single exhaust



The bike uses a single-pipe header and a single muffler. It routes close to the center, and its light overall construction helps improve weight distribution.



Titanium intake and exhaust valves



Light is right when it comes to a high-revving engine’s reciprocating masses. We use titanium intake and exhaust valves with a super-narrow 20.5-degree included valve angle.



Large-diameter valves



The engine's twin-cam design features large-diameter valves with 33mm intakes and 26mm exhausts, which improves flow at high revs.



Throttle body



With a 44mm venturi designed to speed up airflow, the throttle body reaps benefits at low engine operating speeds. You get power and snap right now.



Bridged-box piston



The bridged-box piston design features a reinforcing structure between the skirts and the wrist-pin bosses that helps enable the high redline.



High-volume airbox



The airbox and air-cleaner element have a larger surface area and volume to increase midrange power. Additionally, the air filter is easy to service.



High-performance cam profiles



With input from our HRC factory team, we’ve given the bike cams with profiles that help the engine produce better bottom-end torque while retaining substantial peak power.



Handling



Dunlop Geomax tires



The Dunlop Geomax tires are designed for enduro use, rolling on an 18-inch rear wheel.



New tripleclamps, axle, and steering stem



New triple clamps for 2025 work with a revised fork, front axle, and steering stem to provide a consistent suspension feel and improve rigidity, responsiveness, and turning performance.



Twin-spar aluminum frame



Narrower main spars save weight and improve responsiveness. This year, 70 percent of the frame components are new, enhancing turning performance and working with the new suspension.



260mm front brake



The front brake disc measures 260mm, which provides excellent brake feel and weight reduction. Front and rear brake-disc guards are included.



Low battery mounting



Locating the battery low in the chassis helps lower the center of gravity, which always helps overall handling.



Low rear shock mount



Its lower rear frame shock mount moves the center of gravity further down and improves chassis stability.



Short swingarm



The bike's short swingarm reduces unsprung mass, improves rear-wheel traction, and lightens it for improved handling.



Showa® spring fork



The 49mm Showa® fork has a traditional spring design and a 39mm piston with a 25mm rod diameter that enhances precision, handling, and feel. Upgrades in 2025 include new springs, seals, and valves for a consistent stroke feel across the full range.



Rear suspension



Our Pro-Link® design gives it 12.3 inches of suspension travel and a lightweight spring, resulting in a plush, controlled ride.



Engineering



Nine-plate clutch



It uses a nine-plate design to improve durability and hookup. That means less slip at peak horsepower, better torque transmission through the clutch pack, and improved durability.



HRC Launch Control



Push the button, hold the throttle open, and release the clutch – this bike will do the rest, launching you into the first turn with a big advantage. It's a holeshot-seeking machine!



Special primary and transmission ratios



It gets special primary and transmission ratios to handle the fatter midrange power and torque. The ratios let our engineers use the same shaft centerlines as the previous design so the transmission remains light and compact.



Gear-position engine mapping



An ECU with custom engine mapping for each gear delivers optimal power, setting it apart from the competition.



Large-capacity radiator



A larger radiator area results in better cooling and more power from start to finish. This design includes six percent more radiator area than previous models.



Engine oil scavenge pump



Deep in the engine, there’s a special oil scavenge pump that we’ve designed to be especially small and out of the way. While you may never see it, it helps keep the overall design compact.



Shared engine/gearbox lubrication



The 2025 model uses a shared engine/transmission oiling design. Combining the two systems shaves weight and helps make the engine more compact, especially when placing the right-side cam drive and clutch close together.



Style



Handguards



Whether you’re ripping through Baja or hustling through some tight woods, handguards are absolutely necessary on a bike like this. That’s why it's equipped with them right from the factory.



"In-mold" graphics



With all the time you’ll spend in the victory circle, you need to look your best. Our "in-mold" graphics look great and stay looking good for a long time.



Fresh styling



The 2025 model gets new “stacked” CRF graphics that take their styling cues from our HRC works bikes.



Comfort and convenience



Lower seat/narrower body



Fine-tuning the seat height and narrowing the bodywork makes it easier for you to move around on the bike and helps enhance rider comfort.



Sidestand



Real enduro bikes need a sidestand, and we’ve given this bike a great one. We’ve tucked it in tighter, so it’s out of the way on the trail.



Technology



Electric start



It's equipped with an effortless electric starter. Convenient and lightweight, it’s a huge deal if you need to restart a stalled bike in the heat of battle.



Specifications:



Engine



Engine Type - 249cc liquid-cooled single-cylinder four-stroke



Bore and Stroke - 79.0mm x 50.9mm



Compression Ratio - 13.9:1



Valve Train - DOHC, four valves per cylinder



Induction - Programmed Fuel-Injection system (PGM-FI); 44mm throttle bore



Drive Train



Transmission - Five-speed



Final Drive - #520 Chain; 13T/50T



Chassis Suspension Brakes



Front Suspension - 49mm leading-axle inverted Showa® fork; 12.2-inch travel



Rear Suspension - Pro-Link Showa single shock with spring preload, rebound- and compression-damping adjustability; 12.3-inch travel



Front Brake - Single 260mm disc



Rear Brake - Single 240mm disc



Front Tire - Dunlop Geomax AT81; 90/90-21



Rear Tire - Dunlop Geomax AT81; 110/100-18



Dimensions



Rake - 27.5°



Trail - 4.5 inches



Wheelbase - 58.2 inches



Seat Height - 37.7 inches



Ground Clearance - 13.0 inches



Fuel Capacity - 2.1 gallons



Curb Weight - 242 pounds (ready to ride)



Other



Available Colors - Red



Model ID - CRF250RX


GOOGLE REVIEWS